Capacities determined by length and diameter after sealing.
 
 
Lengths of tubes required to fulfil specific capacities after sealing.
 
 
    CAPACITY
  0 40ml 50ml 75ml 100ml 125ml 150ml 175ml 200ml 250ml
  35mm 79mm 90mm 117mm 146mm          
DIAMETER 40mm     98mm 119mm 140mm 161mm      
  50mm       96mm 110mm 123mm 136mm 149mm 175mm
 
*Guidelines only - customer to determine specific length required
 
 
 
* Standard screw caps and dispensing closures are available to suit all sizes of tubes.
 
  • 35mm, 40mm and 50mm diameters
  • Mono layer Polyethylene - HDPE, LDPE, LLDPE and mixes
  • Gloss, Matt or Satin Lacquer
Click below to view Decoration Facilities:
 
Standard Closures
Silk Screen Printing
Pressure Sensitive Labelling
Offset Printing
Foil Blocking
Dispensing Closures
 
TUBE TOLERANCES
Diameter +/- 0.3mm
Length +/- 2.0mm
Wall Thickness +/- 0.05mm
Orifice +/- 0.10mm
 
Dia. Length
Min-Max
Thread
Diameter
Circum-
ference
Wall
Thickness
Orifice Sizes
35mm 65mm - 180mm 15mm 110:0 0.45mm 2.5mm 3.5mm 4.5mm  
40mm 75mm - 180mm 22mm 125:7 0.45mm 2.5mm 3.5mm 4.5mm  
50mm 100mm - 180mm 22mm 157:0 0.45mm 2.5mm 3.5mm 4.5mm 5.5mm
 
 
  Terms of Use  |  Privacy Policy  |  Corporate Links  |  Site Map